Teledyne O3 Bedienungsanleitung Seite 45
- Seite / 114
- Inhaltsverzeichnis
- FEHLERBEHEBUNG
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Teledyne API Model 401 O
3
Photometric Calibrator Instruction Manual, 01124, Rev. J2
NOTE
Teledyne API recommends that contact closures remain closed at
least
10 minutes to allow for an accurate average zero or span value
to be established.
3.8 Remote Zero/Span Check Or Adjustment (RS-232)
Besides Z/S checking from the front panel, automatic Z/S checking, and remote Z/S checking via
the contact closure inputs, the Analyzer can also be checked via the RS-232 interface. Remote
checking via the RS-232 interface supports zero, span, and zero followed by span check, and is
identical to remote check via the contact closure inputs.
This RS-232 control feature is provided mainly so that a host computer at another location can
control the Analyzer. See Section 7 for detailed information on using the RS-232 interface to do
a remote Z/S check.
3.9 Hold Off
Every type or check or adjustment (zero, span, manual, remote, etc.) is followed by a hold-off
period of 30 seconds during which the internal data acquisition system (DAS) does not
accumulate ozone readings into the DAS average.
3-5
- MODEL 401 1
- CALIBRATOR 1
- SAFETY MESSAGES 2
- TABLE OF CONTENTS 3
- LIST OF FIGURES 7
- LIST OF TABLES 8
- 1 INTRODUCTION 9
- 1.3 Principle Of Operation 10
- 1.3.1 Interferent Rejection 12
- 1.4 Specifications 13
- 1.4.10 Flow Rates 15
- 1.4.11 Power 15
- 1.4.12 Weight 15
- 1.6.1 Electrical Connections 22
- 1.6.2 RS-232 22
- 1.6.3 Pneumatic System 24
- 1.6.5 Output Flow Adjustment 24
- 1.7 Operation Verification 28
- Table 1-1: Test Values 29
- 1.8 Options 30
- 2 OPERATION 31
- 2.1.5 Data Acquisition 32
- 2.1.6 RS-232 Interface 32
- 2.1.7 Password Protection 32
- 2.2 Front Panel 34
- 2.2.3 Status LEDs 39
- 3 CALIBRATION 41
- 3.6 Photometer Calibration 43
- 3.9 Hold Off 45
- 4 SETUP MODE 47
- 4.5 Setting the O 49
- Generation Mode 49
- 4.6 Setting The Time-Of-Day 49
- 4.7 Setting The Date 49
- 4.9 Setting The O 50
- Concentration Range 50
- 4.15 Software Configuration 52
- 0 mV 1000 mV 53
- 5 DIAGNOSTICS 55
- 5.2.1 D/A Output 56
- 6 HANDLING WARNINGS 57
- 7 RS-232 COMMUNICATIONS 59
- 7.1 DAS Reporting 60
- 7.2 Warnings 61
- 7.3 Status/Control 62
- 7.4 Diagnostics 64
- 7.5 Test Measurements 65
- 8 ADJUSTMENTS 69
- 8.4 Flow Readout Adjustment 72
- 8.5 DC Power Supply 74
- 8.6 CPU 74
- 8.7 Status Lines 75
- ± 50 mV 76
- ± 500 mV 76
- 8.12 Bench Feedback Option 78
- 9 TROUBLESHOOTING 79
- 9.2.3 Checking The Keyboard 81
- Table 9-1: Warning Messages 82
- 9.5.5 Cannot Zero 86
- 9.5.6 Cannot Span 86
- Components 87
- 9.6.3 Checking The V/F Card 89
- ° C=2.5V, ± 0.125V/°C 92
- TELEDYNE 96
- 10 ROUTINE MAINTENANCE 97
- 10.2 Leak Checking 98
- 10.3 Cleaning Of Sample Cell 98
- 10.4 Changing The Prom 99
- INTENTIONALLY BLANK 100
- 11 MODEL 401 SPARE PARTS AND 101
- EXPENDABLES KITS 101
- Teledyne API Model 401 O 102
- (table continued) 103
- OPTIONS 105
- Appendix C REFERENCES 109
Verwandte Produkte und Handbücher für Messen, Testen & Steuern Teledyne O3
(4 Seiten)
(42 Seiten)Samsung NP-Q35 manuali
Manuali dei proprietari e guide per l'utente per Lettori CD Samsung NP-Q35.
We fornisce manuali pdf Samsung NP-Q35 per scaricare gratuitamente in base al tipo di documento:
Kommentare zu diesen Handbüchern